Jump to content

Zeeshan Hayder

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by Zeeshan Hayder

  1. Dear Sir, Thnx for the suggestion... Example of "picking your way through a mine-field wearing snow shoes" is self explanatory
  2. Dear Chris, Thank you very much for the clarification and sharing the article which is very useful and helped a lot for decision making. Your valuable input is highly appreciated. Regards, Zeeshan
  3. If i am not wrong SCC means solar charge controller...? Means will have to use a seperate charge controller... Single inverter will not support to different types...
  4. Dera Chris, Thanks for the guidance. Sure i will add a different string for poly christalline panels. Presently my each string wherein there are 4 thin film panels has the following specs;4*90v = 360 volts I = 1.54 Amp Infini supports upto 450 Voc. In this case kindly elaborate what would be the specs of a seperate poly christalline string.
  5. Dear members, I have installed Hanergy thin film panels with Infini plus 3kva inverter at my home. Each panel is 105-115 watts and volts are 85-90. Each panel current is 1.54 Amp. I have connected 4 panels in series on a single stand and then total 7 stands are connected parallel means 28 solar panels total. There are cracks on 4 panels installed at different stands which i think causing resistance during flow of current and i am getting hardly 1700 watts pv input out of 3080 watts capacity. I want to remove the panels having cracks and thinking to add few poly christalline panels which may have different current and volts i.e 12 volt/24 volt and 10 amp etc. Kindly advise that is it possible to connect two different types of products with infini plus 3kva inverter. 2ndly what could be the contribution of cracked / broken panels... Any contribution or creating resistance...?
  6. Dear members, I have installed Hanergy thin film panels with Infini plus 3kva inverter at my home. Each panel is 105-115 watts and volts are 85-90. Each panel current is 1.54 Amp. I have connected 4 panels in series on a single stand and then total 7 stands are connected parallel means 28 solar panels total. There are cracks on 4 panels installed at different stands which i think causing resistance during flow of current and i am getting hardly 1700 watts pv input out of 3080 watts capacity. I want to remove the panels having cracks and thinking to add few poly christalline panels which may have different current and volts i.e 12 volt/24 volt and 10 amp etc. Kindly advise that is it possible to connect two different types of products with infini plus 3kva inverter. 2ndly what could be the contribution of cracked / broken panels... Any contribution or creating resistance...? Regards, Zeeshan
  7. Thanks a lot dear Superdiy for the detailed reply. You have cleared my mind and there is no confusion now. Thanks to this forum for knowledge sharing.
  8. Dear All, I recently installed infini plus 3kW hybrid inverter. I observed that sometime its utility sign was blinking and there was no grid supply to the inverter although utility was available. I noticed that grid frequency was fluctuating from 50.1 Hz to 50.3 Hz. Whenever it becomes below 50Hz unit started working normally. I have changed the grid maximum Frequency to 5.5 Hz. Kindly advise that is it normal to modify the range or harmful for the inverter. An early response will be highly appreciated. Regards, Zeeshan
×
×
  • Create New...