Leonvd
Members-
Posts
13 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Leonvd's Achievements
-
the old model is the MKS 5k 48
-
Hi , I have the old model Axpert 4000w / 5kva Inverter and would like to know if these can feed back to grid. I am Also Thinking of Buying the Axpert Infini Solar 4000w inverter (grid tie) and would like to know if I can parallel this with the old model stated above ? Thank you for all the great info on this page btw.
-
-
-
Sorry I have been gone for a while so only now got to posting the screenshot .Here is a screengrab. Same Use every night ?
-
will get them tomorrow and post as soon as I can thank you
-
Yes I think you are correct. solar generation slows down from around 15:30 then I switch of aircons and that helps. we then use about 1.3kw until about 17:00 when we close. average use then drops to about 500w. This is total load with the inverters own use. so sound about normal then right ?
-
Hi I have a cable from Pylontech connected to raspberry Pi bought with recommendation from Centurion Solar. this reads the SOC from Pylontech and not Axpert Inverter. SOC spot on then.
-
Heatpump and Vacuum tube water heater one geyser
Leonvd replied to Leonvd's topic in Water Heating & Pumping
Thank you all for the replies -
Heatpump and Vacuum tube water heater one geyser
Leonvd replied to Leonvd's topic in Water Heating & Pumping
Hi it is the normal Kwikhot 150l geyser with element removed ad Tasol Solar Heatpump installed -
Heatpump and Vacuum tube water heater one geyser
Leonvd replied to Leonvd's topic in Water Heating & Pumping
Hi Thanks for your quick reply ok so I have the heatpump system already for a long time no plumping ready for solar heating how would I do this connection then ? -
Good day I have probably a stupid question but is it possible to have a Heatpump and Vacuum Tube Solar water heater system connected to the same geaser ( 150lt) Tank ? How would connections need to be done ?
-
Hi guys I need help. I have 4x Mecer SOL-I-AX-5M inverters in Parallel 48x Canadian Solar 275w Solar Panels (12 per inverter (3 per string in series)) 5x usb2000b pylontec 2.6kw lithium batteries. The Whole system is off-Grid. my problem is that at about 16:00 in the afternoon the max input from my Solar Panels is +- 1200 to as low as 700w yet from about 8:00 I get 6000w-11000w out of them. Peak Load on the AC Side is about 5kw-7kw The battey bank will charge full no problem but then when I close shop at 17:00 the load is about 400-500w and the batteries will drain to 20%. Is this Normal or am I missing something. Was hoping for a lot better?