Jump to content
Thank you for the great forum, Safe Driving over the weekend. Sincerely Jason

Querobin

Members
  • Content Count

    38
  • Joined

  • Last visited

About Querobin

  • Birthday November 21

Profile Information

  • Gender
    Female

Recent Profile Visitors

783 profile views
  1. Querobin

    Jinko Solar

    Can I ask how to avoid this molds?
  2. Querobin

    Jinko Solar

    Thank you for your suggestion.
  3. Querobin

    Jinko Solar

    Hi All, Greetings! We have a solar project here in the Philippines, we used Jinko panels 335W which is less than a year installed in about 10 degrees inclination and has accumulated black smudge that looks like residue on the lower edge of the panels but did not penetrated the inside of the module (please see image below). We did a bit of rubbing with microfiber cloth, water and mild soap but can't take it out. The smudge disappears while the panel is wet, but is visible again after the panel has dried. Please help us how can we eliminate this residue. Appreciate answers. Thanks, Querobin
  4. @Jaco de Jongh 3 inverters, infini super 4k to be repair, ordered 3 dc board which we waited for 6 weeks, first inverter was working with the first dc board with supplies of AC, battery and PV, while the 2nd inverter with the 2nd dc board was not successful, the new dc board was destroyed, burnt upon supplying AC from the grid which means (transistor burnt out). 3rd inverter, upon replacing the dc and supplying with AC, there was a spark so we turned off immediately, removed the dc board and tried testing to the first inverter which is working fine and the dc board (3rd) is also working fine. From this actions, could you please help me with your diagnosis if what would be the problem. I really appreciate the help. Thanks, Querobin
  5. Thanks, appreciate it.
  6. DC board is 200$ US for each..
  7. Hi I'm back, I was able to replace the dc board and there are warnings flashing. Please see picture and I hope you can help me figure this out. The error is number 10 and 14. Appreciate the hand.
  8. @Coulomb Thank you for this information. Just to be clear, did you mean I will try to turn on the inverter using batteries above 25V? Thanks again.
  9. Sorry I can't get what you mean but the inverter doesn't turn on, totally off.. I appreciate your recommendations. Thanks
  10. Hi Guys, I have an axpert 3kVA installed in the house with 6 panels and 24V battery, when I tried to connect the air conditioner having 2hp, the inverter shutdown and it doesn't turn on again even in a perfect sunny day. Can someone help me with this? Thank you
  11. Hi Guys, I am having problem with SolarLog 2000 which we use in monitoring, Can Solar-Log 2000 supports SMA data manager? If yes, How?.. I hope someone could help me with this.. Thanks
  12. @Jaco de Jongh Situation: 3 inverters not working I tested the inverters via batteries and they turned on and the errors are both internal component failure but I tried to supply them with grid, then one inverter turned on while the other two didn't.. definitely for the inverter which turned on with grid, I would purchase the DC to DC board. what about the other two, is it the same? DC circuit board? can you help me? Thanks again
×
×
  • Create New...