SeanM
Members-
Posts
6 -
Joined
-
Last visited
SeanM's Achievements
-
Greetings All I have installed two Axpert King inverters with pylontech batteries recently and am not impressed. As soon as the batteries are charged to 100% the inverter kicks off the grid and runs on batteries for a few seconds and then back to grid which charges the batteries again and then repeats the whole day.
-
Greetings All I have a wifi box for my axpert machine and have managed to set it up. My question is this I can see all my data but am unable to see the kwh usage per hour, day and month any advise. Kind Regards Sean
-
Greetings All I recently purchase a wifi box for my axpert and for the life of me am unable to set it up I get to the stage where is says change from AP to station but it won't. Says that you need to restart so I do but still cant change to station mode. Any advice please. Regards Sean
-
SeanM reacted to a post in a topic: Mecer/Axpert Inverter Settings
-
Hi Coulomb Battery mode is the SBU setting Line mode is SOL or Utility
-
SeanM reacted to a post in a topic: Mecer/Axpert Inverter Settings
-
Hi Coulomb Thank you for this explanation. May I confirm my understanding know: Axpert 5000va/5000w inverter AC input breaker 50 amps (10mm cable) to supply inverter loads and utility charging AC output breaker 25 amp (2.5mm cable) as the inverter will handle 22 amps.
-
Greetings All I would like to ask why the Axpert inverter manual says the incoming supply breaker for a 5kva should be 50 amps? secondly could someone explain settings 23 (Overload when in battery mode)