Jump to content

SollyPowers

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by SollyPowers

  1. The administrator password is the default for the app running on a laptop or other device the problem is not there .. This problem is with the mobile app when passwords are lost and you try to recover the password as this is registered on the net . But who to contact there is a real challenge to get your registered device deleted so you can restart from scratch. The closest i got was to see that Acresso is the developer of the software and the opti website might give an answer to the reset issue . The Expensive solution is to buy a new wifi module for the inverter.
  2. The administrator password is the default for the app running on a laptop or other device the problem is not there .. This problem is with the mobile app when passwords are lost and you try to recover the password as this is registered on the net . But who to contact there is a real challenge to get your registered device deleted so you can restart from scratch. The closest i got was to see that Acresso is the developer of the software and the opti website might give an answer to the reset issue . The Expensive solution is to buy a new wifi module for the inverter.
  3. I recently saw an advertised battery pack of 48v Lithium iron from suncycle.co.za I ordered them ( They are not new I was told that they are new be careful )
  4. After many months of getting the manufactures to understand the question the answers is yes the second inverter needs to be set to offgird. ( Which is actually Grid Tie with Backup and no feedback to the Grid )
  5. I guess with no comment from the experts this makes you the expert thank you Barry your replies are appreciated
  6. The First Inverter has two pv strings the pool to run from 9 untill 11. The Stove is to be used between 11:15 and 2:15 the only load from the second inverter is 200W The Second inverter also has two strings and runs the rest of the house just fine. No extrapower needed from the first inverter. The Evening load is never more than 1.3Kw will come from the 1st inverters batteries neither of the inverters will feed back into the grid . I am thinking about earth being common in the DBs that could cause a problem
  7. The manual states that these units cannot operate in Parallel the question i have is can they operate in Series The First unit running a stove and swimming pool ( Gas Geysers ) and the other unit running the rest of the house
×
×
  • Create New...