Jump to content

Lurcher

Members
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Lurcher's Achievements

  1. Thanks guts for this reply. It seems like the only way to go. Thankyou
  2. Hi Guys, Thanks for this good information, its exactly what I need as I am installing an Earth Leakage on the output of my inverter at present. My question is: how do I correctly identify the neutral wires for the circuits currently connected to the inverter loads. My DB is a challenging mess and all the neutrals are attached to a common neutral bar. I need to accurately identify each of them and re-connect via the new Earth Leakage on their own neutral bar. Any bright ideas? Thanks
  3. Grateful thanks to all who replied. I will have a crack at the at the wifi first and let you know. The challenge I face is that the wifi was previously connected to a router that has been disconnected. I also believe that the firmware update is only supported on PC, not MAC so I'll need to get around that one. Thanks guys..! Roger
  4. Hi All, I have lurked around on this forum for a while and really learned that the more I learn the less I know. I have a Goodwe ES that was installed by some village idiots about 5 years ago and it has performed okay. I now need advise or assistance to firstly wifi connect (I have no control at the mo) and then to check the condition of the system. I would like to know of and recommended installers who know the Goodwe well and could could help me. I would appreciate professional or amateur help and am not looking for a freebie in either case. If you guys know of someone I would appreciate the contact details or your help. At this point I mostly need help with wifi connection and quite possibly a firmware upgrade. The system in in Bryanston Jhb. Many thanks,
×
×
  • Create New...