RoTGoT66

Does Someone have the service manual for the kodak OG 7.2 please, Thanks

Hi where can i buy spare parts for inverters, replacement main boards, replacement communication boards, etc Thank you

HI is there any Firmware available for the Kodak OG-PLUS 6.2 inverter? Thanks

thanks but i got this issue resolved, it was a firmware issue, updated both firmwares and problem went away

please share your solution this problem is really frustrating, thanks

I have 2x og-plus5.48 inverters in parallel conected to 3x up5000 batteries if i switch the inverters off by the round grey button on the inverter the alarm 04 goes away and the batteries charge as normal but as soon as i switch any one of the inverters on it immidiatly gives me error 04 low battery but on the inverters i can see the voltage is 52v and on the batteries all the lights are on showing batteries are full

I have 2x og-plus5.48 inverters in parallel conected to 3x up5000 batteries if i switch the inverters off by the round grey button on the inverter the alarm 04 goes away and the batteries charge as normal but as soon as i switch any one of the inverters on it immidiatly gives me error 04 low battery but on the inverters i can see the voltage is 52v and on the batteries all the lights are on showing batteries are full

Any updates on this? Im having the exact same issue on my system, 2x og-plus5.48 inverters in parallel conected to 3x up5000 batteries if i switch the inverters off by the round grey button on the inverter the alarm 04 goes away and the batteries charge as normal but as soon as i switch any one of the inverters on it immidiatly gives me error 04 low battery but on the inverters i can see the voltage is 52v and on the batteries all the lights are on showing batteries are full

Hi do you have any update on this issue? I'm having exactly the same issue with my kodak King inverter, when its running in "Line Mode" it does not use the "PV" to supply the Load as needed, "PV input" stays somewhere between "70w to 144w" and i have 8 x 365w panels (4 string of 2 panels in series), even when increasing the load the "PV input" stays in the "70w-144w" range when in line mode but as soon as the inverter switches over to "Battery Mode" the "PV input" increases according to the load, Tested it with a hair dryer on "Battery Mode" and the "PV input" increased to "2.5Kw" did the same test in line mode but "PV input" stayed at "90w"

"Growatt SPF 5000TL HVM" inverter and "Thesunpays" BALI 48 LiFeP04 battery

Hi im trying to connect the BMS between my Growatt 5kw inverter and lithium ion battery ive done the following steps 1. switch off inverter input and output so its only running on battery 2. went into inverter setting and changed setting 5 to "Li" and then it takes me to setting 36 which i set to (Li02) 3. switched off inverter + battery completely and set dip switches on battery to (1 0 0 0) (on off off off) 4. connected RJ45 cable to BMS on the inverter and RJ45 port next to the can port on battery 5. Switched on battery and switched on inverter inverter now shows the small Li logo next to the battery and some of the setting on the inverter has changed to percentage values but the inverter keeps on beeping and giving me an alarm (fault code 20) which says bms communication error What am i doing wrong or what could be the problem? can it be a firmware issue?

Hi quick question can i use 2x 5KW hybrid inverters from 2 different companies and still connect and run them in parallel, The one is a "Mecer 5kw hybrid inverter" and the other one is a "Easy Power 5kw hybrid inverter" (Not the king inverters) they both look exactly the same,