Thembani
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Store
Downloads
Posts posted by Thembani
-
-
2 minutes ago, Nuno said:
check my post with the drawing, I connected neutral directly to ground in the bus bar
I am so sorry to do this, I am new in this space. where do I find your post with the drawing? Did you connect it in the Distribution Board?
-
Can Nuno please show how and where he bonded his neutral to ground. I have the problem of neutral to ground voltages of up to 110V
-
Hi, I have 2 x 5kW inverters connected in parallel and 2 banks of batteries (4 x 200Ah connected in series in each bank) connected in parallel. The battery capacity reduces to 70% from 95% on initial loading and thereafter slowly discharge at an acceptable rate. The connected load is about 750kW.
I tested the batteries with the battery analyser and they showed 100% State oh Health and 95% State of Charge before connecting the load.
What could be the problem
-
Hi, I have 2 inverters (5kW) connected together. The Watchpower software shows double the output active power when compared to the inverter. However every 20 seconds it shows the correct reading momentarily.
Causes of high voltage neutral-ground? (Axpert)
in Inverters
Posted
Is this the drawing