Jump to content

Andries Taljaard

Members
  • Posts

    2
  • Joined

  • Last visited

Posts posted by Andries Taljaard

  1. I installed a Kodak OG-PLUS 5.48 Inverter
    9x Canadian Solar Panels output 169 Volt
    4x US2000 Plus Pylontech  batteries

    Settings on inverter:-
    02 - 30A                                                                    22 - AON                                              40 - Nrt  
    05 - PYL which adjust 02, 26, 27 29 automatically 23 - bYE                                                93 - Nrt
    06 - Ltd                                                                     25 - Fd5
    07 - Ltd                                                                     26 - 56 V  (AUTO)
    09 - 50Hz                                                                 27 - FLv     (AUTO)
    10 - AUE                                                                    28 - SIG
    11 - 30A                                                                    29 - AUTO CONTROLLED BY 05
    12 - 46V                                                                    32 - AUE
    13 - 54V                                                                    33 - Eds
    16 - SbL                                                                    34 - EU (54V)
    18 - bON                                                                  35 - 60 MIN
    19 - tEP                                                                    36 - 30d
    20 - LON                                                                  39 - Ad5

    The inverter do not charge the batteries from the PV panels 169V input 
    The inverter do not use PV for house usage but drain the batteries
    My PC is connected via a RJ45 cable made up by computer tech

    5. Code Reference:  received 61 alarm which is a communication loss between batt. and inverter

    The above settings is more or less the same that i used on the Mecer 5kVa inverter which use Solar during the day and battery supply power during night  
    Power consumption is 12 kWh / 24 period this include a 150 liter geyser with a 3kW element

     

  2. I'm a "eppie' in solar systems...Solar:- 6x365 Canadian coupled 3 in series and the 2 rows in parallel.
    I begin with a us2000b pylontech battery and a 5 kWh Mecer Inverter.

    My inverter settings according to Mustek Cape Town were not correct although the system worked for +- 5 months.
    I switch off Escom power before switching on inverter in morning when sufficient energy was obtained from the panels.
    The panels give enough energy for the house usage but I could not use the geyser - 3 kW element.  I heat up water after I switched back to Escom.
    I was not sure if I could use Escom and Solar simultaneously  - reason for switching.

    I worked outside and by entering the house the Inverter alarm was on and battery at only one LED emmiting + the Alarm.

    Question:- battery still under quarentee and to whom can I send it for check-up - DO NOT CHARGE.

    https://powerforum.co.za/topic/2439-pylontech-us2000b-recommended-chargedischarge-parameters/

×
×
  • Create New...