Luis Posted April 10, 2018 Share Posted April 10, 2018 Hello We would like to be able to see in real time the commands been send from an smart battery to an Axpert inverter. We have seen the inverter to react to the comments but we are not sure which commands the battery is sending. is there hardware which could be placed in the system to monitor the commands received by the inverter, we have the comm protocol table. Thanks Quote Link to comment Share on other sites More sharing options...
___ Posted April 10, 2018 Share Posted April 10, 2018 Well, it depends of course, and there are simpler ways to do this, but a logic analyser comes to mind. Quote Link to comment Share on other sites More sharing options...
Gabriel_2018 Posted January 3, 2019 Share Posted January 3, 2019 I think It would work conect USB Axpert to Rpi and listen /dev/hidraw0 with Cat command. Quote Link to comment Share on other sites More sharing options...
Richard Mackay Posted October 23, 2019 Share Posted October 23, 2019 Is this still alive?? Do you have a PC with a serial port (9 pinD) ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.