Jump to content

Racpower and Victron system


Recommended Posts

Hi All,

I have installed 4 bluenova racpower on a system with a Victron 8kVa,2x smart solar mppt 250/100.

The challenge I am facing is to increase the charging current,it is not going beyond 17A, it only increase beyond 17A to about 100A when the CAN cable from the Master to the CCGX is pulled out but for a short then alarm comes on the CCGX,I tried to use DIP switches but an error warning (internal failure ) comes up.

Anyone who had encountered this can advise with the remedy.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...