Jump to content

Recommended Posts

Hi, I have 2 x 5kW inverters connected in parallel and 2 banks of batteries (4 x 200Ah  connected in series in each bank) connected in parallel. The battery capacity reduces to 70% from 95% on initial loading and thereafter slowly discharge at an acceptable rate. The connected load is about 750kW.

I tested the batteries with the battery analyser and they showed 100% State oh Health and 95% State of Charge before connecting the load.

What could be the problem

Link to post
Share on other sites
8 hours ago, Thembani said:

The connected load is about 750kW.

That will drain the battery quick smart. I assume you meant 750W, or 0.75kW.

The SOC indicator on Axperts is very crude, depending only on the battery voltage. It counts each 0.1V of battery voltage as 1% of capacity, which is not realistic. So treat it as very approximate. Use a Victron BMV or similar for much more accurate SOC measurement.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...