Jump to content

Issues using Sunsynk AUX Smart Load


Recommended Posts

Have the pool pump hooked up to AUX port, system works perfectly and switches on for the first tim when the batteries reach the target SOC and pv production for that day, if the Smart Load shuts down due to SOC or pv production dropping below limit due to clouds, etc. and THEN even if the pv and SOC conditions are met again, Smart Load DOES NOT switch on , it has to be kick started by switching on a load like eg a kettle for a short time.

  Any feedback to this

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...