April 23, 20242 yr Dear all, just starting with solar and have been reading and assimilating a lot of information in order to design my system. I have now settled in a design and have purchased the following inverter: DEYE SUN-12K-SG04LP3-EU (see attached specification sheet) and I am trying to decide on the panels - currently thinking to get between 18 or 21 of the Canadian Solar 665W CS7N-665MB-AG panels (see attached spec sheet). or 24 PV panels from JaSolar JAM72S30 545 or 550/MR (see link for spec) https://www.jasolar.com/uploadfile/2022/0511/20220511060835815.pdf My two questions are: 1. would these panels work with the inverter? based on my knowledge they should. and 2. I am planning to have three panel arrays of 6 or 7 (8 for JaSolar) panels per tracker string; would that work with the inverter - based on the inverter spec there are 2 MPP Trackers and 2 strings on the first MPPT - do I read the specifications correct in both panels and inverter? I am quite certain that these panels would match the voltage requirements but not sure around the current regs both the IMP and ISC especially for the Canadian Solar panels Any help and guidance would be great and appreciated before I purchase the PV panels as I already have the inverter Thank you datasheet_sun-5-12k-sg04lp3_240416_en.pdf CS-Datasheet-BiHiKu7_CS7N-MB-AG_v2.52_EN-33mm-frame-594-pcs-package.pdf Edited April 23, 20242 yr by VasilisM Added more info
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.