Louissw

Hi, it is 1x 24v module built in BMS LifePo4 with a multimeter on it I can see the battery is on and does not get disconnected, The Synapse settings I set to factory defaults and the battery icon appears on the inverter display the on/off switch is indeed confusing I tried it in both ways in and out but as soon as I disconnect utility power the Inverter goes off. IT worked well with the gel batteries but only lasted 40min hence the reason I replaced the gel batteries with the Lithium battery

Hi guys and Girls ... I am a newbie and just started off with a small 24v 3kva Synapse inverter and planning on expansion as and when I have funds to do so .... So I started with the inverter and 2x105ah gel batteries without PV just to run my marine tank during load shedding. It worked well but the batteries did not last long enough so I decided to upgrade and replace the batteries with a 24v Lithium battery. Now my problem is the inverter charge the battery and the battery is 100% full but when utility power goes down so does my inverter and nothing is powered on. I initially thought it might be overload but it does the same with no load 😞 Is there maybe a setting that need to change for the inverter to switch from utility to battery power or can the battery be faulty ?