Jump to content

EugeneF

Members
  • Posts

    16
  • Joined

  • Last visited

Everything posted by EugeneF

  1. 9x325w plus 3x335 w = 12panels per inverter
  2. I have 27 x 325w Canadian And 9x335w Canadian panels.. The small 100w panel is for my tracking system. I did connect 2S6P yesterday and this morning the problem still the same.
  3. I have 3 x Synerji 5kw inverters with common bank batteries 8x 6v Trojans.. 12 x 325wp Canadian panels coneted 3 in series. 4 stings per inverter.12 panels. Per inverter. P'v volts varies between 126v + 129v. Sun follower on all 36 panels.
  4. On my Inverter the line between pv and charger / inverter goes away
  5. Hi all my PV keeps on disconnect from inverters. I have 3 x 5kw inverter contented to support 3 phase equipment. All works wee but I notice my PV keep on disconnecting.. What could be wrong?
  6. Good day. Any advise on where I can find some software to monitor my solar power system. I have 3 x Synerji 5kw inverters connected to support 3 phase equipment. The system is working very well but I cannot monitor my solar power harvest and power usage. The software that came with the inverters only supports single phase. Any advice will be appreciated 

  7. Where can I find out where Synerji inverters are manufactured?

  8. I have purchased 3 x 5kW “ Synerji “ inverters I also purchased 3 communication cards with cable to support 3 phase equipment The system is running very well and I am very happy. BUT I cannot monitor my output / production as the software I got with the inverters do not connect with pc / laptop I have tried but all failed .
  9. Need software to monitor my solar system. I have 3 x Synerji 5kw inverter to support 3 phase equipment.  I instaled the communication cards as directed in the manuals and all is working very well.  I connected laptop  with usb to inverters and the power monitor program i got with the inverters do not pick up the inverters. Keeps on searching. Any advice will be appreciated. 

     

    1. Chris Hobson

      Chris Hobson

      Synerji comes with its own propriety software which I could not make head or tail of. Although Synerji is an Axpert clone I doubt their communication protocol is the same. Speak to your supplier.

       

  10. Need software to monitor my solar system. I have 3 x Synerji 5kw inverter to support 3 phase equipment.  I instaled the communication cards as directed in the manuals and all is working very well.  I connected laptop  with usb to inverters and the power monitor program i got with the inverters do not pick up the inverters. Keeps on searching. Any advice will be appreciated. 

     

  11. My sun Tracking system is WORKING

    20181212_054622[1].jpg

  12. nearly complete

    20181206_150837[1].jpg

    1. EugeneF

      EugeneF

      Thanks for the suggestion of extractor fan. will look into it .

  13. Hi  Do you know of Synerji Inverters and how do they perform 

     

    1. EugeneF

      EugeneF

      How can assist me with commissioning of Sunerji inverts. I am nearly finish with my installation and need some advice on SWITCHING ON 

  14. Dear Jaco \can you please give me a call

    1. EugeneF

      EugeneF

      Hi Jaco

      My inverters  is SYS1800 Plus Series  5kva /5000w Die specsheet se ek kan net 3000w panele Koppel maar is dit nie vir 4000w een.

      sal ek meer panele op 5000w een kan sit

       

      Synerji Inverters.xps

  15. Hi the distance from my combiner boxes will be 30m-35m I will use 16mm2 cable between combiner box and inverter in the ground therefor 3 individual cables
  16. 2 in series and 5 strings it will be Thank you jaco
  17. Apologies for so many questions My panels are 72 cells Voc 45.5 Canadian solar
  18. How ill I need to configure my panels on this 3 in series with 3 in parallel as I have 27 panels that was sold to me That is 9 per inverter
  19. The label of a Axpert the same as Voltex Just mabe branded for voltex ??
×
×
  • Create New...