Good day.

i know there has been "millions" of posts on this Inverter.

i have an Mecer sol-i-ax-5p that is stuck in Host (Master) mode.

i also have to ad that the AC/INV and CHG lights stay on solid. No flashing

Firmware version 74.40

i can't Re-configure Parallel Settings (Setting 28)

The setting stays on PAL (Parallel) or Master, the setting to SIG (Single) is not available.

The problem that i'm experiencing is that although the inverter says that the battery is charging it as a matter of fact is not.

i was wondering if the HS could cause this.

i replaced my PS Plus 5KW inverter with the sol-i-ax-5p.

my solar panels and battery worked fine with the PS Plus 5KW.

Now with the Mecer sol-i-ax-5p that is stuck in Host (Master) mode the display shows that it is charging. Yet on my battery side it seems like my battery is in some loop. It comes ON then it switches off again.

Any assistance will be welcome.

Regards,

Okay i got the inverter out of Parallel mode.

Didn't know i can only change it while in standby mode.

Sorry for the inconvenience.