AmorEMorte

Good day, Has anyone tried the following product before? EPEVER WiFi Adapter 2.4G RJ45 D I know the RJ45 is not a ethernet port. https://www.epever.com/product/epever-wifi-adapter-2-4g-rj45-d/?_gl=1*6hmq1v*_up*MQ..*_gs*MQ..&gclid=Cj0KCQjw2MbPBhCSARIsAP3jP9xSyg-ZX_qYqcRGp3mDli5lJhvYhNNL43IEkzrXz4WE4bzV2caPzdMaAutMEALw_wcB or https://www.epever.com/product/epever-ble-rj45-d/?_gl=1*flmrn2*_up*MQ..*_gs*MQ..&gclid=Cj0KCQjw2MbPBhCSARIsAP3jP9xSyg-ZX_qYqcRGp3mDli5lJhvYhNNL43IEkzrXz4WE4bzV2caPzdMaAutMEALw_wcB

Okay i got the inverter out of Parallel mode. Didn't know i can only change it while in standby mode. Sorry for the inconvenience.

Good day. i know there has been "millions" of posts on this Inverter. i have an Mecer sol-i-ax-5p that is stuck in Host (Master) mode. i also have to ad that the AC/INV and CHG lights stay on solid. No flashing Firmware version 74.40 i can't Re-configure Parallel Settings (Setting 28) The setting stays on PAL (Parallel) or Master, the setting to SIG (Single) is not available. The problem that i'm experiencing is that although the inverter says that the battery is charging it as a matter of fact is not. i was wondering if the HS could cause this. i replaced my PS Plus 5KW inverter with the sol-i-ax-5p. my solar panels and battery worked fine with the PS Plus 5KW. Now with the Mecer sol-i-ax-5p that is stuck in Host (Master) mode the display shows that it is charging. Yet on my battery side it seems like my battery is in some loop. It comes ON then it switches off again. Any assistance will be welcome. Regards,

VS-40TPS16 https://www.digikey.co.za/en/products/filter/thyristors/scrs/281?s=N4IgTCBcDaIGoGUC0AWADAFQAoIIwDYQBdAXyA Or any of these?

Good morning. Just found this online

Good evening @GerhardK83 Thank you very much for the quick and great response. i have read up on loads of the endless information on this forum. Currently i have disconnected that board and my system is running. Starting it up initially is a tale for another day. i have few other questions but for now thank you for the information. Will update as soon as i've installed the new components. Regards, AmorEMorte

Good day, Love the Forum and the Unlimited knowledge and information available. No question is Stupid? True. Let me get into my little problem. i have an 5kw Apex/Mecer/etc Inverter (Not MPPT) i have a little issue and i hope i can find the right mind to assist me. i have 4 of these Mosfet Transistors that blew on inverter Cant find the specs of this exact part but pretty much the same as the specs i added. 4 of They are all located here. i would like to know if i would be able to replace these with the following? Any assistance would be greatly appreciated. Regards, AmorEMorte