LMJ9175

Please check your messages

SOLD

Item: Kodak H4.6 Hybrid Inverter with data dongle Age: Installed 5 December 2021 - removed 20 March 2022 Price: R 15000 Payment Method Accepted: EFT Warranty: manufacturers warranty - 12 months Packaging: none Condition: Good Location: Randburg Reason: Upgrade Shipping: not applicable Collection: During business hours - 8am to 4pm

Thanks, I think any of the above scenarios are possible or a weird combination of all of them. One of the regular contributers will come and do a proper audit of the system and hopefully we can plot a way forward. It also seems that a decent and comprehensive monitoring system can go a long way in identifying the problem. My gripe with the present situation- some installers seem to do a decent job of safely and correctly installing the hardware. But they have no real understanding of the interaction between the different components, and how to troubleshoot issues like mentioned above. Nor so they have the inclination to do so, when faced with a myriad of new installations every day that load shedding continues.

Hi, Thanks for the above, I meant two battery banks of 3x3.55kva each. So 10.6kva per bank. The problem I am experiencing is not related to elec availability. Both battery sets were at 100% charge, my one inverter just died, the moment the grid went of, the other functions for an hour, then goes offline in 50 second intervals for 5 minutes, then works again until power is restored. The WiFi on both inverters died, for no apparent reason, my installer can "come have a look" sometime. My avg daily consumption is approx 33kwh for the house, with previous inverters (2x4.6kva Kodak hybrids and 1x4.6kva Kodak grid tie)the max generation was approx 65kw per day. I know this, because I was also exporting to the grid (and paying for the elec flowing back past the smart meter) because the installer could not stop the inverters exporting? My consumption at night is around 8kw total, split across the two inverters and battery banks. So there should be plenty to go around. I also have a 16kva three phase generator installed if all else fails. Is there anyone in the Randburg or greater JHB area that can help me, to get all this to WORK?

Good day all, I am not new to the solar adventure - started with a 3.4Kva Mecer inverter, 9x265W panels and 4 lead -acid 200Ah batteries 4 years ago. Accordingly, my expectations and requirements was very basic at the time. I have continuously upgraded as the "requirements" and expectations of the family grew. Through several iterations and evolutions the installation is now as follows : 1. 2 x 10 Kva Kodak OG-10 inverters - coupled with 3x Kodak L1 3.55kw battery sets, each with own BMU obviously - each on to a seperate phase of the house DB 2. 1 x 4.6 Kva Kodak Grid tie - wired into DB - no batteries, supply power on demand 3. 18x265w PV panels , 10x365w PV panels and 8x495w PV panels In spite of the above - I still end up with half of my house in darkness during load shedding. My question is - is there any reliable technician that I can pay to come and sort out this mess? My experience so far has been, that everyone will sell me more hardware, install it sort-off, set it up to "basic" suppliers settings - never to be seen again. I am not technically minded, have learnt some due to necessity, nut I am ready to go and buy candles Any help will be appreciated