Jump to content

ccitaly

Members
  • Posts

    26
  • Joined

  • Last visited

1 Follower

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ccitaly's Achievements

  1. Ok, I figured it out! For some reason the F2809 file was getting stuck. So I left the inverter (connected to battery only) in the ON position, closed the ISP tool, disconnected the USB cable and turned off the batteries. I then plugged back in the USB cable, launched the ISP tool and selected the correct file, etc then pressed flash. I waited 2 seconds then turned back on the batteries and it started to reflash!!
  2. Ok, I figured it out! For some reason the F2809 file was getting stuck. So I left the inverter (connected to battery only) in the ON position, closed the ISP tool, disconnected the USB cable and turned off the batteries. I then plugged back in the USB cable, launched the ISP tool and selected the correct file, etc then pressed flash. I waited 2 seconds then turned back on the batteries and it started to reflash!!
  3. Yes using Windows 10 and made all updates current. Tried with both ISP V 4.20 & 4.21. I hace communication with inverter and all LED's and display function. I can flash the F030 .bin no problem but not the F2809
  4. Ok, here is exactly what I did. SPF5000ES running the following firmware 040 04 301 041 04 301 Disconnected load, panels and AC input. Running only on Pylontech US2000 batteries with comm cable still connected. Followed ISP SOP and connected USB cable and opened ISP. Tried to flash the F2809.bin first and just gets stuck at Send: Start! Tried at least 10 times. Also removed battery comm cable and still no change. Tried starting flash then powered on inverter, tried shutting down and restarting. Tried another PC. Negative results. Inverter just keeps beeping and stuck at same message. Comm board has all lights still flashing. I know I have communication to inverter because on ISP tool I clicked "TEST"" before flashing. Tried loading the F030.bin file and it worked no problem. So I assume the comm board is good if I am able to flash the F030 file but not the F2809??? Now when I power up the inverter I show the following firmware: 008 00 316 041 06 104 My display and all buttons still work, all LED's on the comm board still work, I am able to change settings on the inverter but will not connect to anything. Does anyone know how to reset and SPF5000ES back to factory settings? I saw in another post about pushing buttons 2&3, entering password 305 then at step 34 go to reset but it will not let me reset. Does anyone know where I can buy a comm board from? Any suggestions? I do not have a warranty for this and I installed myself. I am still able to re-flash the F030 file no problem. Soo... wierd!
  5. Does anyone have either firmware with both .bin files for inverter and MPPT 040 04 301 041 04 301 or 040 05 701 041 05 701 my email is [email protected] Thanks
  6. Can you also send it to me please. email is [email protected]
  7. Could I also get a copy of that firmware? I have an SPF5000ES and need to update firmware.
  8. Ok, here is exactly what I did. SPF5000ES running the following firmware 040 04 301 041 04 301 Disconnected load, panels and AC input. Running only on Pylontech US2000 batteries with comm cable still connected. Followed ISP SOP and connected USB cable and opened ISP. Tried to flash the F2809.bin first and just gets stuck at Send: Start! Tried at least 10 times. Also removed battery comm cable and still no change. Tried starting flash then powered on inverter, tried shutting down and restarting. Tried another PC. Negative results. Inverter just keeps beeping and stuck at same message. Comm board has all lights still flashing. I know I have communication to inverter because on ISP tool I clicked "TEST"" before flashing. Tried loading the F030.bin file and it worked no problem. So I assume the comm board is good if I am able to flash the F030 file but not the F2809??? Now when I power up the inverter I show the following firmware: 008 00 316 041 06 104 My display and all buttons still work, all LED's on the comm board still work, I am able to change settings on the inverter but will not connect to anything. Does anyone know how to reset and SPF5000ES back to factory settings? I saw in another post about pushing buttons 2&3, entering password 305 then at step 34 go to reset but it will not let me reset. Does anyone know where I can buy a comm board from? Any suggestions? I do not have a warranty for this and I installed myself. I am still able to re-flash the F030 file no problem. Soo... wierd!
  9. I have the same exact problem but dont have the option to return the inverter. What was the solution?
  10. The F303 .bin file flashed no problem. Have tried multiple times the F2809 .bin and it will not flash.
  11. Ok, seems to be working by flashing the F030 file first
  12. Also di you leave the communication cable for the pylontech batteries connected to the inverter? I have mine still connected
  13. I started with the F2809 and just alot of beeps and after 15 minutes nothing. Did not even erase it seems. But I do have communication to ISP tool. Maybe I need to flash the other file first?
  14. What .bin file did you flash the F2809 or the F030?
×
×
  • Create New...