brand2000

I am not sure exactly what to change. Would you suggest changing both these settings under battery to the following? What else? Max charge current: 60 A ---> 30/40A Max AC charge current: 10 A ---> 30A Appreciate the help!

Would you say this flick you experience affects other devices in the house like electronics/fridges in any sort of negative way? It does not SEEM healthy. I will have a look the 60A setting, if indeed it is set to that. Thanks for answering!

Hi all, Question: Is it normal to experience flickering of all lights in the house during the second or so that the inverter switches between battery and grid source output modes? The flickering occurs even under low total load. Additional info: I have a combination of incandescent bulbs and LED lights in the house. There is a single geyser and stove that runs directly from the grid on separate circuits, not via the inverter I include pictures and some setting and specs from the software, hopefully it is of some help. System consist of 1x battery, 6x solar panels connected to a single inverter RCT-AXPERT 5K Inverter PYLONTECH US2000 48V 2,4KWh Lithium-Ion battery (Part nr: US2000NB02V00201) Software settings and specs: Driver: Axpert Monitoring connection: Direct cable Machine type: Off Grid Topology: Transformerless Max parallel units: 9 units Nominal battery voltage: 48.0 V Expected AC input voltage: 230.0 V Max AC input current: 21.7 A Max AC output apparent power: 5000 VA Max AC output current: 21.7 A Max AC output power: 4000 W Battery settings Battery type: User Charger source priority: Solar first Shutdown battery voltage: 46.8 V To grid battery voltage: 47.0 V Back to battery voltage: 49.0 V Battery float charge voltage: 53.2 V Battery bulk charge voltage: 53.2 V Max charge current: 60 A Max AC charge current: 10 A Input/Output settings Output mode: Single machine output AC Input voltage range: Appliance AC output frequency: 50.0 Hz AC output voltage: 230.0 V Output source priority: Solar/Battery/Utility Overload bypass: Enabled Overload restart: Enabled Primary source interrupt alarm: Disabled