rjk35

Thanks. Anyone know where I can have it repaired in the East Rand? Mustek want to replace the mainboard for R5900.

Hi Scorp007 Took a bit long but I managed to check. Used a multimeter. Battery Voltage 26.9V. I kept monitoring, then turned the power off. Voltage didn't move. Stayed on the 26.9V Thanks for helping. Regards

Hi Scorp007. Thanks for replying. Thanks for your input. I will run some tests tonight and come back to you. Regards Ryan

HI All. Hope everything is going well. I have a Mecer Axpert 3KVA Inverter. Using 2 X Hubble S120 Batteries in series. The problem is when load shedding comes the inverter continues to supply power for about 5 seconds then stops. Both input and output display 0V. Battery Logo remains and shows full. After load shedding input displays 240V, a few seconds later 240 on output and power is back. Has anyone else had this problem before? Regards Ryan

Hi All Hope everyone is doing great. I have a Mecer Axpert 3000VA/3000W 24V Pure Sine Wave Solar Inverter/Charger (600W MPPT) no Solar Panels Its been running fine with no issues for 2 years now. All of a sudden something strange is happening. I noticed yesterday morning that the batteries were almost flat. Power was on the inverter but there was no charging. Inverter showed 240 V input I unplugged the power and disconnected the batteries. The it off for about 2 hours. Reconnected batteries and power again. Straight away the charge light started flashing and started charging the batteries. Checked on it a few times during the day, batteries were charging. This morning I went and checked again. Something again, batteries almost flat and no charging happening only the Power/INV light is flashing no charge light. Not even the fault light is on. Has anyone had a similar issues like this or any idea's on how to solve this one? Thanks in advanced Ryan

Hi All. I see Mecer now have an Aspire range for pumps. Is anyone using these yet? Regards R