QuentinF

SOLD

THank you.

Thanks, responded.

Price drop R9000 each. 😮 can work out something better if you take both. 😉

Price drop R10000 each

Item: 2 X Pylontech US3000D LiFePO4 (3.6kWh, 48V) - Sealed boxes Age: Brand new - Happy to open the boxes in front of serious buyer Price: R9000 each Payment Method Accepted: Cleared EFT or cash on collection Warranty: Unsure how it works, These are brand new warranty replacements from SegenSolar. Packaging: Yes - Still in sealed packaging. Condition: Brand new Location: Cape Town Reason: Upgraded to a larger capacity Deye battery while I waited for these. (to be honest, from what I heard about Pylontech warranty, I was not expecting them to be replaced, but they were. Shipping: Can ship at buyer’s risk and cost Collection: Yes, collection preferred

SOLD

On hold pending sale

Item: Pylontech UP5000 LiFePO4 (4.8kWh, 48V) Including all the accessories it originally shipped with and cable kit Age: 3 years. (I have the invoice) Price: R10000 Payment Method Accepted: Cleared EFT or cash on collection Warranty: Should still have, comes with 5 years. It was registered for the 10 year warranty but I'm unsure if that is transferable. Packaging: None. I can package it at buyers expense if it needs to be shipped. Hence prefer collection Condition: Excellent working condition — SOH 97% I can provide a SOH report. Location: Cape Town Reason: Upgraded to a larger capacity Deye battery Shipping: Preferably not — but can discuss at buyer’s risk and cost Collection: Yes, collection preferred

@Asher-02 No sorry, still unable to get it to communicate here, eventually gave up. If yours is working 100% with manual setting, would you mind sharing them. Our manual setting of the below program settings dont appear to be performing well. Program setting, 02; 05; 12; 13; 26; 27; 29 Thank you

Apologies. Inverter is sold

Item: Sunsynk 5kW 1P Hybrid PV inverter Age: 12 months (only used for 9 months) Price: R19000 Payment Method Accepted: EFT/Cash Warranty: Yes, Only a year old Packaging: Yes Condition: Inverter in excellent (repaired) condition. Comes with new standard accessories, still in packaging (taken from its replacement). Location: Cape Town Reason: Had to send it to Sunsynk for repair, the MTTP was not charging the batteries. (Installed 11 June 2022, Went in for repaires 30 March 2023) Due to the time it takes them to repair items, I installed another inverter. Repaired by Sunsynk and still in box. Shipping: Sure - At buyers account and risk. Collection: Sure

No sorry, no luck here. Trying to connect with a Kodak OG5.48 inverter.

I posted it on the 8th of May, or at least a few pages that i got from another forum.

Hi Staute, Unfortunately not, still struggling. I'm trying to connect to a Kodak Inverter. Found the attached on another forum, in case it helps. NEnergy AT48100.zip

Hi Herminator, Would it be possible for you to scan in and share a copy of the manual for the Nenery AT48100? Regards Quentin

Hi Kalahari Meerkat and ChrisDied, Thank you for the feedback. This has helped a lot.

Hi, Im seeking some advise on expanding my solar array. I currently have 6 x Canadian Solar 445W (Imp = 10.89A) in a single string on MTTP1. I am looking to add an additional 6 panels on either MTTP, but when looking at the larger wattage panels (>500w), some brands appear to have an Imp higher than the MPPT on my Inverter which according to the data sheet has a PV input current of 11A per MTTP. (Sunsynk model = Sunsynk-5K-SG01LP1) Examples below. Using these two brands because I have mostly heard good things and my existing Canadian solar panels perform very well. Happy for recommendations on other brands. Canadian Solar - 520watt to 550watt - Imp ranges from 12.84A to 13.2A JA Solar - 525watt to 550watt - Imp ranges from 10.35A to 10.55A Am I therefore limited to which brand I take due to these values or am I using the wrong thing to calculate the limitations of my Inverter? should I only look at VoC? On a separate contrivercial subject I plan to add an additional Pylontech battery to the system, I have 2 X Pylontech US3000C, should I remain with this model or can I add a UP5000, price wise it seems the better option. I know there are a lot of comments to not do it, and others that state just make the UP5000 the master. Any advise? Thanks in advance for any feedback.

Hi Alif, With all the load-shedding of late we have not done much more testing besides confirming which pins have a signal on them. What we found was signal on pin 1,2,7,8. Basically like most of the battery layouts attached.

Hi Firoz, Nothing official yet. My Dad has been doing some testing on the pins with an Arduino Oscilloscope and there appears to be pulses generated on pin 7 and pin 8 of the RS485.

Thanks Siegfriedt, I've seen this one, very much the same as the 'TheSunPays' battery manual. We will try a few pin combinations that I found already to see what works. Was just hoping someone had the manual for this specific one.

Thanks zsde

Hi, Does anyone have a copy of the manual for the NEnergy AT48100 LifePO4 Battery Module. There was no manual in the box and the supplier is unable to provide one. I'm specifically trying to get the pin layout for a (CAN/RS485) comms cable between this battery and a Kodak OG5.48. Any help would be appreciated. Thank you.

Retracting sale, rather sending it up country to my folks.

@sunset1, For those that I can see available online, they range from about R11000 to R12500. You welcome to DM me if you have a reasonable offer.