Curt12345

That would be greatly appreciated. Google delivers little in that area and the manual received with the unit, is very small and the size 8 font doesnt help matters.

Hi Guys Thanks for the feedback. I have managed to book the unit in for repair. A few transistors were blown in the inverter. Definately disabled the protection with that setting change. I had an eelctrician wire the unit for me, we definately had the AC input and AC output wired correctly. We are not using solar, so purely mains to recharge the battery for now. I think the issue is after reading your advise, we have a seperate ciruit to power select plugs, but it is wired incorrectly. That circuit is getting AC from utility as well, which is causing the AC to travel up into the AC out of the inverter. I could be wrong but i will ask the electrician to check.

Good Day All I have a recently installed Mecer 5kva inverter with 3kva lithium battery. I noticed a 60 error fault, did some research and realized the inverter and been setup up to run parallel. Instead of contacting the supplier and listening to the little voice in my head. I decided to Google and I located a thread, the thread mentioned changing setting 28 to SnG on the menu. I did not find that exact setting and used S1G, turned on power, heard a pop, smelt a burnt smell and the batter is also in alarm mode. My question, will it be possible to repair the inverter? Or have I maybe damaged the battery. I'm not even sure what I did. Anyway your input and feedback is appreciated.