BGD

@Georg594 , i have also disconected the cable, suprizingly the production curve looked very nice, but suprisingly the information was wrong, meaning that with the cable out solar assistant showed me i have produced 10kwh, but actually in the battery went only 8kwh, you can investigate further but in my opinion if you take out the plug the information is wrong, and actually the real production is the same. 

I have put both the firmwares which @Georg594 has modified. The first one with the limit to 100 volts for me it`s too little, however the second one with 200v limit, i see it`s working quite good, 2 days ago i had clouds and raini day and i can say it performed satisfying, much beter than the firmware from MPP. 
My setup is as follows : MPP 8048MAX inverter with 2 strings of 6 Jinko 405W Solar pannles 6 on Pv1 6 on PV2, oriented soth fixed angle degrees 32.
VOC : 45.44 V x 6 = 272.64 V / string
VMP : 36.33V x 6 = 217.98 v / string
As an ideea i will post a picture so you have an ideea how the solar pannels are mounted, and i will post pictures with the:
46.08 Firmware from mpp
100v firmware sunny day
200V firmware toghether with clouds and rainy day, and the  200V firmware with full sun day.
@Georg594 - really appreciate your effort and time and thank you, if you can share a paypal account, so we can make a small donation for your time and effort. 
If any questions let me know, or more detailed graps let me know what you want to see  

 
 
 
 

I have put both the firmwares which @Georg594 has modified. The first one with the limit to 100 volts for me it`s too little, however the second one with 200v limit, i see it`s working quite good, 2 days ago i had clouds and raini day and i can say it performed satisfying, much beter than the firmware from MPP. 
My setup is as follows : MPP 8048MAX inverter with 2 strings of 6 Jinko 405W Solar pannles 6 on Pv1 6 on PV2, oriented soth fixed angle degrees 32.
VOC : 45.44 V x 6 = 272.64 V / string
VMP : 36.33V x 6 = 217.98 v / string
As an ideea i will post a picture so you have an ideea how the solar pannels are mounted, and i will post pictures with the:
46.08 Firmware from mpp
100v firmware sunny day
200V firmware toghether with clouds and rainy day, and the  200V firmware with full sun day.
@Georg594 - really appreciate your effort and time and thank you, if you can share a paypal account, so we can make a small donation for your time and effort. 
If any questions let me know, or more detailed graps let me know what you want to see