Skip to content
View in the app

A better way to browse. Learn more.

Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

StefanZA

Members
  • Joined

  • Last visited

  1. Hi, Yes I'm using that and I've checked the "GEN" checkboxes on those ("GRID" was already checked). Thanks! I'll read up a bit on my specific generator's model to determine the amps. When eskom is offline we do switch off everything which draws significant power (geyser, stove, aircons, etc). So basically just keeping the fridges, some led lights and TV on at that stage. I'm sure my generator should be able to handle that + hopefully charge the batteries a little bit. Awesome, thanks for the videos + info. Lots of information which I'm not familiar with but this helped a lot, will read up a bit more. Thanks everyone!
  2. @PsyWulf Thanks for asking, I believe it's wired to Aux. I don't have a changeover switch where I can flip the Inverter's input between eskom\generator.
  3. Hi everyone, Inverter: SunSynk 8kW Battery: Solar MD 14.3kWh Hoping someone can guide me in the right direction. A company assisted us with a solar installation about a year ago, they did a fantastic job but I can't seem to get hold of them currently so I suspect they might have closed down. They did wire up my small-ish generator when they did the installation. I honestly can't remember if we tested it back then but yesterday was the first time we ran into the scenario where eskom was off most of the day, and I needed to charge the batteries using my generator. After starting up the generator it seemed that the batteries were not being charged. I believe the wiring is set up correctly so probably just a configuration issue. Should the setting under "Battery Setup" > "Batt charge" tab > "Gen Charge" be checked for this to work correctly and is there perhaps anything else I need to configure? My knowledge anything electrical is extremely limited so any guidance would be appreciated.
  4. Battery has been sold. Inverter is still available.
  5. Hi Everyone, Putting this up for sale on behalf of my dad who lives in Bloemfontein. Please note that shipping is not an option. Both items are currently in Bloemfontein but my dad does travel between Bloemfontein and Centurion quite often when they come and visit us, so arrangements can be made to collect in Centurion as well. Item: SunSynk 10kw 3 phase Inverter with WiFi dongle Age: Purchased 20 October 2021 Price: R35,000 Payment Method Accepted: EFT Warranty: Remaining of 5 year warranty (+-55 months) Packaging: Packed in original box Condition: As new Location: Bloemfontein Reason: Upgraded to 12kw model Shipping: No Collection: Yes (either Bloemfontein, or Centurion with prior arrangement) Link: https://www.diygeek.co.za/product/sunsynk-sun-10kw-3phase-hybrid-inverter-free-wifi-card/ Item: Narada 150Ah 48v 7.2Kw Lithium Ion Battery - Sold Age: Purchased 27 October 2021 Price: R20,000 not negotiable Sold Payment Method Accepted: Eft Warranty: Remainder of 3 year warranty (+-31 months) Packaging: None Condition: As new Location: Bloemfontein Reason: Upgraded to Freedom One 20kwh Shipping: No Collection: Yes (either Bloemfontein, or Centurion with prior arrangement) Link: https://www.diygeek.co.za/product/narada-150ah-48v-7-2kw-lithium-ion-battery/

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.