FJM

That would have been my next try, to replace the regulator. Thanks for the confirmation.

Hi, I have strange issue, well for me anyway, my gas geyser tries to ignite but, no flames. I then have to disconnect the orange gas pipe from the gas bottle, you can hear the gas in the pipe escape, poof, and if I then connect it again open the tap we have flames and hot water. why? it is like there is a gas block in the pipe which does not allow the gas from the bottle to push through, any thoughts on the issue? Thanks

Thanks for the reply, I do not have grid 100% off grid. Most days we make it through just when we have two days bad weather we might not make it to the morning.

Hi, I just want to know if the following is normal or not. When my battery get to 15% it disconnects. (no problem with that) Then as the sun comes up and the solar panels start charging the batteries, it will switch on the appliances and disconnects immediately again, as if there is not enough power, it keeps doing that a lot. Is there a setting to stop this connect/disconnect till there is enough power and only then allow power to the appliances. (for now I disconnect the main on the circuit breaker till it is on 16 or 17% SOC), but what if I am not at home. Thanks

It is when you have two inverters of same size and two batteries all configured as a master and a slave

Hi. Can someone please help me with a sketch of to wire a split system. Just inverters and batteries. I have two Luxpower 5.1kw offgrid inverters and two 5.1kw Shoto lithium batteries. Thanks