Peter Reed

Thanks for the reply, Jumper, till next time.

Hello All, I have tried the Multisibcontrol software and get no connection to inverter with usb - usb-b( usb - printer cable), have tried 2x different ones, work on my printer.Also have tried rj45 to usb with mercer adaptor. Can install a few readings and click okay and thats it, no inverter and can't fill it in either. Is my Sunmagic 5kva 48v hydrid inverter not up to this, ( from the very bottom of the barrel ) or am I not doing any thing right as I have not got pylon batteries but 2 sets of 4 100ah gel batteries and they are connected to the inverter. Hope there is an answer outthere, or else I will have to wait till I can upgrade to a better inverter.

Hello Jumper, yes that looks similar to mine, but there are quite a few that look like that of different makes. Thanks will try the Multisibcontrol and see what happens.

Hello Piper, thanks for the reply, sorry, yes I have a usb to printer cable(usb - usb-b. The software that you use, says it is for PIP/Axpert inverters, so you say it will work with Sunmagic? Hello Coulomb, thanks for reply, no my system does not look as picture, but seems to be a newer version and smaller thats can hang on to wall. Still trying o find pictures of setup.

Hello, I have the above and have read all blogs on forum, but still no advice on clearing this problem. I have used all different cords and updated all software for laptop and usb's, also restarted laptop afew times, have tried different versions of watch power not working either, and also deleted and re-installed watch power latest version 1.14. Is there anyone out there that has had this problem and got it up and working?