Claydol

I tried with differente loads.if i switch off all loads the municiplaity inverter shows me 400 W consumption costantly. CT clamps are pointed correctly to inverter. I Will try with zero export to loads.

Yes

Near the inverter, like two meters away. We used the stock CT, no modificationz with Arrow pointing as showed in the manual.

Hi, I have two deye sun 10k sg04lp3 in parallel with 40 kWh batteries. In the app I see in this period with zero export to ct and solar sell unthiked (i'm not allowed to sell atm) around 1 kWh drawing per day in the app that is quite ok. But when I read the measuring from the municipality meter I see a costant drawing of 10 kWh per day!!! Why this behavior? I attached the readings by the municipality meter and from solarman app.

I will try, but I checked several times. The fact is this issue doesn't occour every day, but it's happening like once per week or every two weeks. The inverter suddendly starts to charge the batteries from grid, despite enough solar power and/or very low load from the house, untile the soc reaches 100 %....

Strange behaviour at night. Charing to20 % then discharging to 10 %

DEYE SUN-6K-SG03LP1-EU HMI 0000-C362 MAIN 0-4382-1515 updated today

Hi, I have a Goodwe GW 5048-EM with batteries. I noticed sometimes the inverter starts charging the batteries from grid until the soc reaches 100 % like that: The graph shows how the batteries are charged from grid at night. How is that possible? The working mode is set to general, what could cause this?