mikeuser

Hi, I was wondering if someone could perhaps give me some assistance/guidance. I bought an Axpert King 5KW inverter and a Pylontech US3000C Battery as a backup/UPS system for when loadshedding strikes. After a few different forum topic (thanks everyone) I managed to get the setup completed and all seems to be working well except for one thing: Whenever I am running on Utility power and there is no cut off it seems as though when the battery is at 100% full it seems to use the battery for a while and then switch back as both the battery and inverter show that they are charging again. I would have though that once the battery is at 100% that it would stop charging altogether but this is not the case as on the inverter is constantly shows its trying to charge the battery. The only setting I changed was 05 set to PYL Also the cable between the battery and inverter does seem to be working as the battery icon on the inverter is flashing in and out. I connected it via the RS485 port on the battery. Is it normal behavior to be in a "constant" state of charge? and if so wont that affect the battery life cycle?