NeilB1

Hi Everyone, We have an installation with 2 x 50kW Sunsynk inverters in Parallel. This installation had an existing 200kVA generator on site, with the auto changeover built into the generator with a controller doing the sensing on phases coming in grom Eskom. So the inverters were installed down stream from the generator, so that the generator supply the inverters, but also can supply the building directly should the inverters fail. My question is: With the generator connected to the grid connection of the inverter, would the Generator signal port stil work when the programmed SOC of the batteries are reached? And will it cut that Gen signal port when it receive power on the grid port again?

Hi everyone, I've found this post of @TjObie and decided to try it myself. I am a complete rookie with node-red and pretty much Pi as well, so TjObie helped me with the links to setup steps etc, but currently I am stuck. I've loaded the json file onto node-red, which at first had about 20 missing nodes. I've installed all of the missing nodes except for 2: HIDConfig and HIDdevice All available options to install from "manage palette" is not working when searching HID, and no results coming up when searching any of the 2 abovementioned nodes. Google hasn't been of much help either, unless I am searching for the wrong info? Can anyone help me onto the right path? Thanks N