MarcI
Members
-
Joined
-
Last visited
-
Ah Ok. Thought that was if the Arrow was pointing in the wrong direction.
-
-
Think I am going to try that and see if i get different readings
-
-
yes the have, but with some white 2 flex. Not a twisted pair. Do you think the polarity on the wires could be wrong. It was only extended about 2.5 meters
-
-
When I look on the sun synk app on my home, also not the Total ac load. Looking at getting a Efergy E Max so I can mount it in the kitchen and can see real time what the Total AC load I am using so I don't overload. Any other suggestions for a display where I can see the AC realtime.
-
-
Ok, I think I get it now. The Dials only show what the inverter is pulling from the grid. Not the extra that the AC load is using. Same with the dial on the AC Load. It does not show the full AC load that the Essential circuit is using. It only shows what the inverter is supplying excluding what the grid is supplying
-
Yes, Does not have a negative. I did check that
-
But then shouldn't is reflect that on the dial screen, Why does it not show that it is pulling 578w from the grid.
-
Ok, I checked the CT coil and it is installed between the prepaid meter an my main breaker which seems correct as per the manual. any other suggestions I should check.
-
Thanks for the info. Thought that might be the problem. Will call the installer and speak to him about it. Just wanted to see if I was correct or if I was Just reading wrong.
-
Good Day, Could somebody please explain this to me. Had my system installed recently but a few things not adding up A = PV is 2163w B = Load that the inverter is supplying D = load that I am using. C = What is this, where is that 578w comming from E is only showing the load that the inverter is supplying, Not the full load on the UPS i.e 1879w Am I looking at it wrong or do you think the CT coil is in the incorrect Place When We have loadshedding and the grid is off, All the figures are perfect.
