EngineerBC

Hi everyone I have a set of SDA 10 5kWh Shoto batteries and I want to get the SDC 10 5kWh and combine with the existing. I need SDC 10 because its on the compatibility list with Deye will this be possible? In particular will it communicate with the SDA?

Hello everyone, I have growatt 5000es in parallel and there was a drainage of batteries unti they are dead. Now there is sunlight and they starting to charge but the error is 00. In the manual errors start at 01. Is there anyone who has had this error before. Your assistance will be appreciated

Yes i have tested a lot on this setup but the input and output of each inverter is seperate i guess thats where the issues come from. Someone was suggesting i use the same input breaker double the rating of one and the same output breaker maybe that's the reason. I have been taking time to switch them on at the same time and the outputs both at the same time as well

So i have this setup but one of the parallel inverters keeps tripping and destroying the inverter mother board. The input breaker for inverter 1 trips and output breaker for both trips. How do i make sure this doesn't happen. Note. Breakers are correctly rated. The parallel communication is in place and when switched on the one says horse the other slave

Hi Everyone, I've just started in solar installations and created an installer code on the oss growatt. I have added a plant but however the shinephone app when i press anything on the dataloggers page it says "Demo Account cannot be operated" Unfortunately i don't know how to add my screenshots here as a link below😢😢