lemonxah

batteries started charing after 4 hours of loadshedding last night after i played with the charge amps, i read that this battery should be charged at 50A but i have 4 of them so i was thinking this should be 200A then but i put my charger on 80A but it just started charging lasted for 5 minutes and then everything stopped, disconnected the batteries and reconnected to the inverter restarted the charging, i have now after loadshedding waited for it to charge up again and then went to turn off all the batteries and then only started the master so that it starts up the rest and now they seem fine again. This is concerning to me cause i have had to reset the batteries like 4 times in 2 days So i am thinking something happened and the batteries lost sync with each other i am thinking not sure. Will have to build a serial logger so that i can monitor the traffic on the RS485 comms

yeah i have the battery info on SA, i have another question related to the batteries. like last night power was being drained from all the batteries at the same time but today it looks different: is it normal for the system to only use 2 of them even though all of them are there? if i draw more power i can see the other 2 batteries contributing lik 20w each but nothing much

ok this makes sense then. I didn't know that there are differences in the dip switches for rs485 and can, so when CAN is setup then the inverter sees them all fine, but solar assistant only sees 3 and throws an error, and in the RS485 setup, CAN communication with the inverter doesn't work but it reports correctly in solar assistant. which makes sense now that you showed the different settings based on the comms that is used. Now just need to figure out if i can use RS485 for comms with Deye 5KW and shoto. in the documentation i saw that it only mentioned CAN Appreciated

i also have 4 batteries and setup like this also but solar assistant only sees 3 batteries and ihave a deye 5kw hybrid inverter and not sure what the capacity is it sees. Have you had any luck with the dipswitches?