JanPKotze
Members
-
Joined
-
Last visited
-
Had the battery firmware upgraded at Elleyhill and all problems sorted. Tx
-
I'm having similar issues with Greenrich battery
-
I installed a Luxpower SNA5000 5kw inverter and Greenrich UP5000 100ah 4.96kw battery (No Solar) in November 2022 and are experiencing issues. (Jan2023) 1) Inverter is only reporting a 50ah battery instead of 100ah. I have seen this to be a common issue with Luxpower on forums My inverter has the newer BMS cable setup that uses a standard ethernet pinout for comms. my battery brand is set to number 2 (seems to be OK with comms as it is reporting SOC%) 2) I get major voltage drop below 60% SOC I have set voltage cut-off at 44V because at low SOC the voltage just drops to 0 3) Practically- with average consumption of 300w during the night, I might reach 4 hours during load shedding but as soon as I even briefly consume over 1Kw, the battery dies before 2 hours. Is this a setting issue or is it a bad battery?
-
I have the same issue. Lux SNA5k with Greenrich Battery. BMS reporting 50AH only. I also have the newer Lux with straight cable pinouts. Made up a cross-over cable to test but BMS only works with straight cable.
