Adriandanut

If i turn Off the grid Works works very good until the cut Off Voltage.

I think the inverter is to blame .. it's an Easun smw 8kw .. and from what I've read on other forums it would be an Axpert clone or something like that .. and it might not be that successful . thanks anyway for the answers .. I tried all the options .. and at 52v max charging and at 51v and still nothing...

I check all the Settings …many Times …i don’t know what Could be …the inverter is an Easun smw 8kw ..

The leds are ok and full when he stopa from discharging ,and the load from the house îs about 300-350 w.

I Take Off the Cable .. still charging to 53.2 .it doesen’t stop to 52v .. and When he reach 53.2 It dosen’t switch to battery back … User mode and Cable take Off ..

With user mode and 52v max charging ( i cant set 52.4) and BTG 46v still Charge until 53.2 v .. But Now isn’t switching back to battery with this Settings .

Ok . So you Say to change PYL with USER mode and to set 51v max charging and BTG 46.5 ? To SEE what happens , isn’t ? Thank you

I use PYL Settings with bms comunication. I put 51v max charging for battery and 48v back to Grid .But the inverter still Charge until 53.2 v .and the SOC light are steady, and Show that the battery îs full ...thanks

pylontech us3000c discharge from 53.2 v to 49.8 v in 2 min with 300w load .. then back to grid overnight .. mode SBU . Inverter Easun smw 8kw . can someone help me ? thanks

pylontech us3000c discharge from 53.2 v to 49.8 v in 2 minutes with 300w load .. then back to grid .. mode SBU .can someone help me ? thanks