vlcsas

Sorry for delay in coming back to this issue. I resolved it in 5 mins in the end. Just tried every phase combination and a last the lift worked.

Hi Coulomb Thank you for coming back to me. The lift motor is 2.9KW The Axperts are configured as phase 1,2,3 and in the matched breakers points in the breaker box. All Neutrals are linked across the inverters so all bonded. The inverters are locked to 230v and cant see anyway to change that. The generator is matched to 230v as well. We measured the voltages across the all phases with the inverters only and then the generator on and the phases all measure the same (say within a couple of volts) The lift control is a massive great big unit but I dont have full details about it with me at the moment. We tried neutral to earth bonding which made no difference. I feel it must be a phase issue but im at a loss at the moment Best Regards

Good day to everyone I have a problem that maybe someone can assist with I installed 3 x 5kw MKS inverters running in 3 phase mode and 30kwh of storage. Which seems to be working fine The 3 phase was installed primarily to run a lift in the house which is 5 stories high. But the lift failed to operate. The lights come on but no other response. I assumed that the lift was faulty as it has not run for 9 years previous and as all other levels of the house had power I waited for the owner to get it serviced. We decided to add a 3 phase backup generator. Upon comittioning and running through the inverters on bypass mode. Suddenly the lift burst into life and operated perfectly. as soon as the generator turned off. The lift returned to a non operation state. Inverters show no errors at all. We have also tried nutral to earth bonding which made no difference. Any help would be happily received