TheRealChuckNorris

Ok so I can change my settings via the dongle remotely but not on the inverter itself, also just limited settings...

Reset it just now , BMS link back but I'm unable to change any battery settings for some reason.

I am going to attempt a factory reset then , thank you

I still got the same issue, did the cables, restart etc.

Its. on the battery settings 1st tab, you will see there are 2 AGM options, I just used the voltage one. Haven't resolved it yet, ordered a cable just in case

Placed it on AGM setting for now thank you !

Thank you, just checked the cable, all ok.

My system has been running flawlessly for 3 months and all of a sudden there is no comms between the battery BMS and inverter. I restarted the system several times but had no luck. Any idea what could it be or what my next steps can be. Can't sit without backup have a Marine Reef Tank and with the current CPT weather, I will wipe my whole tank if without power for long.

Hi Guys, I got myself a Sunsynk 5Kw Inverter with a Dyness battery and a 4Kw Inverter Generator just to start my Solar Grid Tied journey slowly. My final day plan is 2X5Kw Inverters and 4X Dyness batteries with solar panels ... I am a qualified Millwright but have been out of the game for 13 years so I'm not completely incompetent and will be attempting a DIY until my wife instructs me to get a professional out. My first goal is to get my marine fishtank currently using 1-1.2 Kwh on solar panels and replace my Mecer 2400W and 4XFIAMM FT180s that is end of life at this stage. My first priority will be to replace my 1980's DB TNC-S Supply with a 3-Tier 15-Way Surface Mount Steel DB and here is where I need some sound advice. Would there be any issues if I have my GRID, Switch Over, and Essential Load side in one DB as per the image.? Earth will be common but Neutrals split.