terkazarian
Members
-
Joined
-
Last visited
Everything posted by terkazarian
-
Thanks for all answers, i'm a bit lost here with all the answers. Here is some basic diagram to explain the idea. i need to know what parts do i need to make it work Drawing1.pdf
-
Hello I've got 2 separate solar panel systems with 2 inverters. System A is the bigger one with more space available on the inverter for adding extra panels.system a got a better feed in tariff. System B is the smaller one with a lower feed in tariff. I want to be able take about 10 panels from system B and automatically (programmed by hours) connect them to system A during the morning and also the after noon. Then i will maximise the production of system A that got a higher tariff. The inverter in system A is big enough to handle the extra panels. Is someone can provide with a diagram and the necessary parts for the system? Thanks Arthur
-
Hello all I've got 4 5000ES inverters in 3 phase mode. i can see aמ individual inverter with it's data but how i can see a combined picture of the system? Solar production, battery usage etc... Thanks Arthur
-
I've added another inverter to the phase with the ac and other heavy load appliance, it fixed the problem, once the AC kicks in the ups is not activated any more.
-
thanks you very much for the info, will try to add another inverter to the most busy phase
-
i can't find any info about HV bus, can you please explain about it?
-
so if i will add another inverter to the most loaded phase it should fix the problem? or i need to switch to SPF6000ES?
-
Thanks
-
Thanks, will do. will they able to answer anything than firmware? is anyone here have a similar setup as mine that can share their experience, how it work for them?
-
you are correct, can't much the firmware (screen shots attached), if there is a newer version for one of the models, please let me know. all syncs up and work, so far there is only 2 problem, the first one as described here and also a new one that the system is not going to ac bypass mode when overloaded (option 18 is enabled), it cuts the power and auto restarting.
-
2 inverters are from newer version and one is a older
-
10kw canadian solar and 30kwh seplos 200a batteries. the problem accurse no matter what power source in use
-
3 Growatt inverters are synchronized to work as 3 phase mode
-
the phase is not loaded, i'ts not near the 5kw max
-
i understand that, but it happens also when the power comes from the solar or the battery (no matter what SOC). if the UPS is activated during that time, i guess that the other appliances that are not protected with a UPS are getting "dirty" electricity. if i will add another inverter in serial to the heavy load phase, will it fix the problem?
-
Hello all, I've got 3 units of Growatt spf 5000es in 3 phase configuration. Once i turn on some heavy compliance (Electric Kettle - 2KW, AC- 2.5KW) i can hear that the UPS beeps for a second and then stops. it sounds like a voltage drop or something like that. Any ideas for solution? Thanks, Arthur
-
Hello all i've installed 3 growatt spf 5000 es as 3 phase system, for now the only input is the battery. Once i've turned on 3 of them, it shows like it operating an has an ac output, but when i check the ac output with a multimeter, there is nothing. I'm attaching the screenshot of the settings, including the firmware versions (2 are same, the third is different firmware). Maybe it's a firmware problem? if someone can provide an info about the latest firmware of this units it will be great. Thanks Arthur
-
it's ok that they will not be combined, i will use each phase separately
-
Thanks, i probably will buy another Inverter and make it 3 phase system for the house
-
Main DB 3 phase and has 3 phases into Sub DB The main has 40A each phase and Sun has 25A each phase
-
because the solar system is connected to a sub panel that connected with thin cables that i can't replace. so i guess that i need to configure the two units as a 3 phase system but without the third phase inverter
-
thanks for your answer. just to be sure, i feed in each inverter with different phase (240V each phase) of the grid and on the output of both inverters i will get a single phase of 240V that i can combine in to a one switch? PS my Growatt 5000 es is Europe version, not US
-
the feed in phases are 23A 230V each. the loads is about 10KW, so in order to provide it i need to use 2 23A phases of 3. if i will run them as 2 separate inverters, should i connect any communications cable between them as they are going to be connected to the same battery?
-
if i will run them as 2 separate inverters, should i connect any communications cable between them as they are going to be connected to the same battery?
-
the feed in phases are 23A 230V each. the loads is about 10KW, so in order to provide it i need to use 2 23A phases of 3.
