LeopardJunkie

Good Day all, Can someone please advise what the Max power draw is of this unit. The booklet states 661w during printing. I have a Growatt SPF 3000TL with a 2560Wh LifeP04 battery. Each time that the printer starts up the inverter trips, even if there is no other load on the inverter. Can the initial startup of the printer be more than 2500w? Will adding Panels and/or another battery assist with this problem that I am experiencing. Assistance will be appreciated

HI All I have the same question. Growatt SPF 3000TL 24v with a LifeP04, 2560Wh battery(Lifetide). I had this recently installed, but now need to install solar pannels to assist @ the small office during the upcomming winter months @ stage 6 Loadshedding. According to the SPF manual, 1500watt solar input is allowed @ 102vdc max. So my perception is that three 500watt or three 480Watt pannels @ 24v will work, or is there another configuration that I can use or SHOULD use. Your assistance/comments will be appreciated.

Thank will do

Thank you and Thank you @Antonio de Sa, mine is the other way around the slave is doing more work. But thank you. My system has only been installed on the 15th of Februaty 2023 so plenty of learning to come for me.

Address Setting (menu item #28) is always skipped, at least in advice I have seen on line, as irrelevant. The manual only states: “(Default 1, 1~255 Settable)” I Ask because I noticed that the slave inverter works more(fan's) than the host. Is this normal? Both are set to Nr 1 at setting 28 Is this the address setting for the number of Parallel inverters? Assistance would be appreciated. Kassie My System 2 x Growatt SPF 5000 ES inverters(Parallel) Single Phase 230v 4 x Pylontech US3000C bateries(Parallel) 48v 16 x 425 Canadian Solar Panels(two strings of 8 each)