BHAS

Thanks so very much, this is a big help

Dear members Can someone please assist with the pin layout on the data cable from the Growatt inverter to Leoch Lfeli 48100 battery. I'm also looking for the bulk charge voltage for these batteries. There was no info in the box unfortunately. Many thanks

Morning all Yesterday, during our loadshedding time, about 10 minutes before loadshedding ended, inverter starting beeping with error code 04 on the display. According to the book this is for low voltage. Never did this before. Batteries won't reset and inverter won't start up so I can't do a thing. Is there a way to get inverter booted up again

Haven't checked the load early hours of the morning, but only 2 fridges would drawing power then. When you say timer, are you referring to the inverter?

Hi Bobster The shut down happens when I'm not on loadshedding.

Good morning Need some help to address the weirdest occurrence. Set up is 48v , 2x5kva Leoch LEFLI 48100 batteries and Growatt inverter. On the last 3 Monday mornings at approximately 3.30am, the system shuts down and we are not load shedding at the time. I reset the main battery, system powers up, state of charge on the batteries is full, except the final led says charging and inverter charge light flashes. Even during stage 6 load shedding, the system performs like a champion so this shutdown is inexplicable Really stumped and frustrated and hoping some forumites can point us in the right direction Thank you all.