Chetty
Members
-
Joined
-
Last visited
-
What are pinouts for the RS485 cable that I would require for the communication between the inverter and the X100 batteries?
-
@HubbleLithium I have the same problem.
-
@HubbleLithium I would like to set the voltage settings for my DEYE inverter with 2 x X100 batteries connected. Currently it using the Use Batt % mode with the following settings: Float V = 52.8 V Absorption = 52.8 V Equalization = 52.8V Equalization Days = 90 days Equalization Hours = 0 Shutdown = 10% Low Batt = 25% Restart 40% IMG_5508.heic
-
Chetty joined the community
-
I have a DEYE 5kW inverter that is connected to 2 x X100 Hubble batteries. I have an ethernet cable connected between the inverter and the master battery and another one between the master and slave battery. Can this setup actually communicate between the battery BMS and the inverter or must the setting be for voltage based settings? I am reading mixed documents that seem to state that there is no CAN or 485 communication possible.