HelloDarth

Finally got it to work last night. Followed all the steps which I have previously done about 20 times. however this time I logged out of the ShinePhone app and then logged back in and straight away tried to pair the datalogger and it worked like a charm. I suspect it must've been a bug on their side. Thanks for your assistance Remus.

Hey Remus, followed your steps again. reset the datalogger and its flashing blue but Im still ending up on the same configuration error screen on the app.

Hey Remus, I have done that about 5 or 6 times, trying both my 2.4G and 5G wifi network and still no luck.

Found this on a previous post from HAM -> For anyone finding this in future, it is a bad idea to use any old installer code. This will add your datalogger to that installer's account. Unless you don't mind a random person knowing about your installation, I would not do this. If you want your own installer code use this site to register for a code: https://oss.growatt.com/login?lang=en

Hi all, I cannot for the life of me get my growatt datalogger to connect to my Growatt SPF5000ES inverter it was supplied with. I've logged into the datalogger and tried setting it up on both a 2.4G and 5G wifi network and still no luck. I've gotten the datalogger light to flash green, flash blue, stay solid green, solid blue whilst trying to set it up and still cannot get it to work. I've tried to set it up on standard mode and hotspot mode with still no luck. the error I keep on getting is as per the attached screenshot on the shinephone app. Is there something I am doing wrong or could there be a fault with the datalogger? Any and all help is appreciated. Thanks in advance!

So as I understand it by reading a few forum posts, my inverter is saying "UTI.FIRST", which I interpret to mean that municipal power should be used primarily and failing that (load shedding) then it should switch to battery as the secondary. But when there is no load shedding I am still seeing the inverter powering a portion of my house by looking at the load percentage. As per the attached picture it is showing that my load percentage is is 3.9% even though there is currently no load shedding, and that percentage will increase if I switch something else on like an additional light for example. I am unsure how to access the SBU & SUB output priority through the inverter menu. 21F4BCB4-6437-4859-AC57-F67F23DAAB6C.heic IMG_2847.HEIC

Hi Everyone, I recently purchased and installed a Growatt SPF 5000ES inverter with a Growatt Hope 4.8L-C1 Lithium Battery which has been working like a charm during load shedding. However I am finding that when municipal power is back that the inverter fans ramp up when using high draw things like the kettle or coffee machine, also noticed that the inverter will supply power to the house when the power is on and charge back up to 100%. Is this normal or should there be settings I should change? Thanks in advance.