IM B
Members
-
Joined
-
Last visited
-
I have a: -1x Victron multiplus II 5kva - Cerbo gx -1x Freedom won eTower. The eTower shows up on the cerbo, but when I check the firmware version it shows, |--|. Any ideas why this is the case? I experienced two issues which I'm not sure is actually normal.Can anyone comment on these as well? -The battery is rated at a continuous load of 4.7kW with a max discharge at 5,2kW, however I tested the battery with a load of about 4,3kW and the battery switched off. The battery was at about 98% state of charge. -There was another time when the battery switched off with a load of about 3.4kW at around 70% state of charge. Surely the battery can handle these types of loads.
-
IM B joined the community
-
I have a: - Victron multiplus II 5kva - Cerbo gx -Freedom won eTower. The eTower shows up on the cerbo, but when I check the firmware version it shows, |--|. Any ideas why this is the case? I experienced two issues which I'm not sure is actually normal.Can anyone comment on these as well? -The battery is rated at a continuous load of 4.7kW with a max discharge at 5,2kW, however I tested the battery with a load of about 4,5kW and the battery switched off. The battery was at about 98% state of charge. -There was another time when the battery switched off with a load of about 3.4kW at around 70% state of charge. Surely the battery can handle these types of loads.
