RuanLaubscher

Use output 3,4 on CN2 its labled as G-Valve and tick signal island . There seem to be some confusion in the manual

Thank you . What i understand from this is that the strings are paralleled by the mppt? So bringing in 2 x series strings of 8 panels each would be perfect.

I want to bring in 3 strings of 8 panels each . The first mppt has 2 inputs and the second mppt has 1 input.

Good day guys, I have a question regarding the mppt on a Sunsynk 12kw 3p. As seen on the photo above i can bring in 2 strings of 8x 500w panels each @ 45.59 Voc per panel "assuming " the strings are paralleled internally (refering to the first mppt). If this is not the case the Voc would exceed the mppt input voltage?

Thanks for the help Yes my house have a 3phase supply . The reason for the 12kw inverter is i want to use as little as possible power from the grid during the day when pool pump, washing machine etc etc are running and eventually in the future to go “off grid”. Once the system is up and running ill do my changes on the essential side

Perfect thanks

I am not referring to the aux output. If anyone could assist that would be great

Good day guys, I need some advice and assistance on the following. I have a little confusion over the grid input/output on the inverter. My total Home Load is about 15KW at max I am looking to connect only essentials(1KW max) on the Load output of the inverter in order to battle loadshedding right. The rest of the load will stay on the mains , but id like to supplement the mains via the PV to lower electricity costs. Should this load exceed 12KW , would the rest of the load be supplied via the mains like in a typical gridtie application? Without tripping the inverter Thanks in advance.