wikusvic

Thanks for all the help did manage to get it into float stage.

Hi Thanks for the all the help, got the inverter to go into float stage. i set the float and bulk on what i had it on the gel 27.1 for float and bulk 28.2 took 2 hours and boom into float will adjust the setting bit by bit. The bulk time setting is at 5min.Thanks alot for your help.

Yes does nothing, set it to 5 to 10min and 60min as recommended by the battery book. That num 32 setting is only to stop the bulk charge within that time. But on this inverter it does not work it is like it is on auto like on the gel battery setting.

So did the 29.2v bulk and still no float, there must be a bug or something on the inverter for not going into float stage. Tested the amp going to batterie and it does stop charging but keeps the voltage on set for bulk charge, So did a test and doesn't matter what i do the float setting does not work they can delete it from inverter. Did the 28.2v float and 28.,2v bulk, the inverter charge light keeps blinking say the batteries is charging but no amps to battery so it is must be floating on bulk volts? Is it safe to set the inverter to 28.2 volts bulk charge and leave it, as there is no more amp going to batterie pack. Tested it and if i disconnected the batterie the volts sit at 27.0v and that is fine for me for loadshedding difference is only minus 0.5volts as the battery suppose to float at 27.5. The float suppose to be on 27.5 but will be now on 28.2v as i set it so that is 0.7v difference. Is it safe to leave it at that volts?

So did the 29.2v bulk and still no float, there must be a bug or something on the inverter for not going into float stage. Tested the amp going to batterie and it does stop charging but keeps the voltage on set for bulk charge, So did a test and doesn't matter what i do the float setting does not work they can delete it from inverter. Did the 28.2v float and 28.,2v bulk, the inverter charge light keeps blinking say the batteries is charging but no amps to battery so it is must be floating on bulk volts? Is it safe to set the inverter to 28.2 volts bulk charge and leave it, as there is no more amp going to batterie pack. Tested it and if i disconnected the batterie the volts sit at 27.0v and that is fine for me for loadshedding difference is only minus 0.5volts as the battery suppose to float at 27.5. The float suppose to be on 27.5 but will be now on 28.2v as i set it so that is 0.7v difference. Is it safe to leave it at that volts?

So did the 29.2v bulk and still no float, there must be a bug or something on the inverter for not going into float stage. Tested the amp going to batterie and it does stop charging but keeps the voltage on set for bulk charge, So did a test and doesn't matter what i do the float setting does not work they can delete it from inverter. Did the 28.2v float and 28.,2v bulk, the inverter charge light keeps blinking say the batteries is charging but no amps to battery so it is must be floating on bulk volts? Is it safe to set the inverter to 28.2 volts bulk charge and leave it, as there is no more amp going to batterie pack. Tested it and if i disconnected the batterie the volts sit at 27.0v and that is fine for me for loadshedding difference is only minus 0.5volts as the battery suppose to float at 27.5. The float suppose to be on 27.5 but will be now on 28.2v as i set it so that is 0.7v difference. Is it safe to leave it at that volts?

Jip also got one and there is a float bug, does not want to go into float stage. But saw at least it does stop charging on bulk charge. no amps going to batteries after it hits the bulk charge volts, but volts stays there not dropping to float voltage. And it does it only on the user defined setting for lithium, the AGN and FLD works for Gel batteries. Got this setup, also got the Manual for it 3.5kw 100A MPPT

I left the bulk charge time on auto. So can that also be the problem. Wil test it after work today. Yes did change it to user. And did set program 26,27 and 29. Can i maybe set the bulk voltage up to 29.2 and leave it for a hour to see if it goes into float stage? Or is it to risky?

Yes did change it to user. And did set program 26,27 and 29. Can i maybe set the bulk voltage up to 29.2 and leave it for a hour to see if it goes into float stage? Or is it to risky?

Okay so here i go, got a ecco inverter 24v with a 24v lifepo4 A grade with build in BMS inside battery. But does not got a connection port for the BMS to inverter on the battery pack. Did setup all the setting as required in the book that came with the battery. everything works fine except the inverter does not want to go into float stage doesn`t matter what i try! It charge the battery to 29.2v but stays there, tested with tester to see if the inverter is still giving amps to the battery to charge. So no Amps when it sits on 29.2v but still the inverter keeps the battery on that volts and not going down to float on 27.5v, i tried lowering the float to 27v still nothing. Bulk charge is set on 28.8 as asked. Can the battery get damaged if it does not go down to float stage on 27.5v as the batteries is kept on 29.2volt? and i don`t know why this is happening. Did have gel batteries on it and the inverter did go into float stage.

Hi I've got the same inverter that setting doesn't show in the manual, but i know what it is, it is the settings for the Ah on your battery bank, so that it can display the correct amount of battery life left in your battery bank on the battery display screen. So if you say got 2×2 220Ah 12v batteries on the 24v inverter you can select 200Ah. If you got say 100AH 24v battery you can select 100Ah. Otherwise the level on the battery screen will not work 100%.