Justin 2

Apologies but just looking at the firmware is it the .13 or .14 that I should be using? I would assume .14 but rather check first

So I have a backup inverter generator we use for cloudy days so that is our ac supply as I don't want anything to do with eishkom. That gives me a stable 220ish volts and to note it was not running at time so ac circuit was not active. Also all settings have remained the same.

Hi Coulomb thank you for getting back to me. Sorry about how the post came out I did not realize each paragraph was a post. I will try the firmware and let you know. Another issue I see is that it is reading voltages incorrectly on the ac input side, since our incident it is showing 175v in where it would before the fault show 220v.

Hi all I am desperately needing help and cannot seem to find correct answers. I have an axpert 5kva inverter currently running firmware 20.13 My wife accidently plugged in our tumbledryer and it went to error 08. I have tried all the obvious solutions but I understand it is probably the firmware bugs and would like to flash that. I did try doing the kettlekomp 72.20e but had no luck with communications, later I found out this is for a 64v and see that it failed for a reason. I only have 1 chance to flash the firmware so I am hoping someone like @coloumb would be able to assist me on correct firmware. Thanks in advance