R4nc1d

@GreenFields @TaliaB Thanks for all the help, just to let you know I managed to solve the issue. I upgraded to a SunSync. 🙂

@GreenFields definitely good questions that i will rely to the installer. But on the Lead Acid note, the battery setting is lithium Ion, so i dont think the Lead Acid setting is applicable. I can only assume that it is trying to charge at 53.2V because the Charge Type is Set to "According to Battery SOC", I can try changing it to According to Battery Voltage Would the Generator Charge Start Battery Voltage(V) = 54.0 and the Generator Charge End Battery Voltage(V) = 56.4

As a side note, am i suppose to also set the AC First setting?

@TaliaB, i know the installer did do a firmware update, i will try your suggestion tomorrow, but what would that really do? I honestly thought this might have just been a setup issue on myside.

@GreenFields the model number is SDC10. Please excuse the ignorance, but i have no idea how to set the discharge limits to 50A DC. I assume it is something here.

Can some please explain to me what is happening to my inverter. I basically get it on a daily basis, and my installers cant figure it out either. I think it has something todo with the EPS. But i am not 100% sure. Not sure if it helps but i have a Shotto 5kwh battery My settings are as follows Application Settings EPS Voltage Set(V) = 230 PV&AC Take Load Jointly = Enabled Charge Settings Charge Current Limit(Adc) = 110 AC Charge = According to Time AC Charge Start Time 1 = 00:00 AC Charge End Time 1 = 23:59 Generator Charge Generator Charge Type = According to Battery SOC Generator Charge Battery Current(A) = 30 Generator Charge Start Battery SOC(%) = 20 Generator Charge End Battery SOC(%) = 100 Max. Generator Input Power(W) = 7370 Any help will greatly be appreciated, this is what i am seeing on the app