zatinus

i realise this is an old topic, and I'm a newbie.... @The Bulldog , hope you can help since your installation sounds similar. If i buy a 30kw solis 3 phase, and install a victron quattro on 1 phase, + most of my house load is on that same phase, will the solis 3 phase basically allow most of the solar generation load to be used by the one phase? I'm struggling to find documentation that is clear about the solis capability, but I assume for now like other 3 phase solar inverters, each phase can only be a 3rd of the total. I'm planning to install 36 x 405w canadian solar panels for circa 14.5 kw generation capacity, all connected to the solis. All the load is on a single phase with just a 3 phase heatpump for underfloor heating in winter.

thanks... looks like the right solution for me. now to see if the multigrid 3kva is the right size for my requirement. appreciate the response.

good afternoon, new here! Just wondering if this system (Victron MPPT + Multigrid + CCGX + Batteries) will keep working when the grid power disconnects? ie. in island mode. I don't quite understand the change / impact of NRS097.2.1 on the configuration? almost sounds like the system have to switch off when no grid power but from the snippet it sounds like it should be able to keep running. I'm planning my system, and would like to have limited batteries for backup, 8kw of solar, grid tied. when no grid, should just keep running. normal daily usage should be from PV, then GRID, then battery. hope it makes sense. Thanks Tinus