Gonduir

Thanks, I'll play around with it and try have watch power accept the settings like you suggested

Thanks Jumper, really appreciate the assistance I'll play around with the settings to get the equalization working on the inverter to the battery. The manufacturing date of my battery says it from 30/09/2022, hope that is outside the Covid issues that were seen in previous batteries. At the moment there are no issues with the battery or inverter that I can see, it just worries me that it stays on 95%.

Thanks Froggy - Is this something I need to worry about or change something in the settings to stop it from going into voltage protection?

Thanks Jumper, I've tried to set the setting for balancing charging and the charge time - The ability to active Balance Charging work but when setting the timeout for it to 120 seconds, it doesn't seem to accept the value I input and when I query it, it looks like the value has been removed. Do you have any idea why this might happen?

Thanks! There isnt a specific problem I would like to fix, being in the IT industry I like to keep my devices on the latest firmware I'll keep and eye out of the forums for a version that would work with my inverter.

Wanted to ask another question regarding updating the firmware of the inverter. I've read the forum post here but it's very confusing to me if my firmware can be updated. Is someone able to assist me with understanding how to tell if my inverter can be updated to a newer firmware version? The current firmware version is 52.00.

Thanks for your reply Coulomb, appreciate it. At the moment, my battery is only being charged using grid power, my solar is being installed this weekend but wanted to understand if there was something wrong with my current setup. Since posting for help, my battery started charging at 55.6v once it reached 95% and stopped charging at 98%, it's gone back to the float voltage of 54v. What I understand from your advise, everything seems fine with the current setup and battery, will just have to see once my solar is installed.

Hello everyone, First time posting here and need some help with my inverter please. I have a Mecer SOL-I-AX-5M4 (Axpert) inverter, paired up with Solar Assistant and for some reason, although the Battery absorption charge voltage is set to 56.4v, the battery will only charging at 54v. Here is a pic of my current settings (Pulled off another thread on here) for my Shoto battery - SDC10-Box 5 (5.12kwh) This is the current charging of the battery at the moment (On 75%, charging to 95% - It never reaches 100% for some reason and just stops at 95% - That's another issue I need to fix sometime) Anybody able to assist with why it's not charging at the 56.4v that's setup in Solar Assistant - I've checked the WatchPower app and the bulk charge it reflecting the same voltage.